Home > Banner Stands > Fabric Banner Stand > Replacement Print Only >

REPLACEMENT PRINT for Telescopic Banner Stand With 8'x8' Fabric Print
Telescopic Banner Stand (Step & Repeat)


 
Lowest prices on the Internet!
Our Price: $326.40


Availability:: Usually Ships in 24 Hours
Product Code: APDE11F


Full Design Service:


Qty:  

  
Description Technical Specs Turnaround Time & Other Information
 
This is a REPLACEMENT FABRIC PRINT for the PDE11F 8'x8' Telescopic Banner Stand with Fabric Print. This product is NOT shipped with the PDE11 Telescopic Banner Stand hardware.

Starting a new campaign or launching a new product, but your previously-purchased PDE11 Telescopic Banner Stand is still just as good as new? Set off in a new direction with a REPLACEMENT 8'x8' FABRIC PRINT for our Telescopic Banner Stand!

These free standing telescopic banner stands, also known as a Step and Repeat Banner Stand and Jumbo Banner Stand, are versatile, having the ability to be used as both a single or double sided banner display unit. Adjustable on both width and height, the unique telescopic design can display banners ranging from 52" to 95" wide and from 36" to 96" tall.

The banner stand is constructed with ease of use and durability in mind. The stand features an aluminum framed body for easy set-up and convenient transportation. With two 4lb, 18" long steel base plates, our telescopic banner stand can hold up large light-weight banners and is well suited for any indoor trade show environment.

The telescopic banner stand is ideal for use as a backdrop/background display for trade show booths and presentations; also perfect to display promotions or for use in the office lobby. Requiring only a few minutes to set up, you can use our stands for multiple occasions and tasks without any headaches.

Telescopic banner stands can be used with banner graphics (vinyl/fabric). The banner graphics are hemmed on the top and bottom. Another way to attach the banner is by having grommets placed in by simply zip-tying them to the top and bottom pole. For further specifications please refer to the instruction manual or give us a call if you have any questions.

Please contact us if you want to print graphics for this telescopic stand.

Click the button below to get the artwork template of the Replacement Print for Telescopic Banner Stand With 8'x8' Fabric Print.



Uploading Artwork:
Before you upload your artwork to us, please make sure you've gone through the guidelines and requirements that are appropriate for the product you've ordered. Images that are in the wrong format, too low in resolution, or are the wrong dimensions can cause in a delay in your turnaround time since we would need to contact you to make the necessary changes.

When you're ready to upload your artwork, click on Artwork Upload on the top menu.
Step & Repeat Telescopic Banner Stands in Canada
Features
  • Ideal for Backdrops/Background Display
  • Indoor use only

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Banner Stands > Fabric Banner Stand > Replacement Print Only